Changing Your Clothes

Shopping, Sewing, Upcycling, Repairing: Make the most of your clothes!


1 Comment

Makeover Monday: A Tale of Two Skirts, Part Two

Previously on Makeover Monday, I showed you how to create a peplum out of a full skirt, and prepare it to be attached to a pencil skirt. Today, we’ll finish this project by sewing the peplum to the skirt, then reattaching the partially-removed zipper and the waistband.

Let’s get started, continuing from last week’s post, which got us to the point of pinning the peplum in place and adjusting the gathers.

1. Pin and machine-baste the gathered peplum to grey skirt.

Red Alert! If the zipper on your skirt is not an invisible zipper, like mine, reattach your zipper before adding the peplum.

Adding peplum to skirt

Adding peplum to skirt. As shown, make sure that the seam allowance of your pencil skirt are folded out; this is where you will reattach your zipper. And fold the zipper-opening edges of your peplum under before pinning it to the skirt. Machine-baste, using previous stitching line as your guide.

Continue reading


2 Comments

Zip It, The Finale: 5 Easy Steps to a DIY Zipper Pull!

In the short amount of time I spent getting ready this morning for my great DIY zipper pull experiment, I learned several things:

1. I have relatively few clothes with zippers.

2. The ones with zippers are almost all invisible zippers. (This is probably due to my preference when making clothes— I find invisible zippers the easiest to install.)

3. The pulls on invisible zippers vary considerably from those of regular zippers.

Why are these facts important? Well, if you look at the following 2 photos,  you’ll see that the available places where you can connect a new zipper pull are quite different:

Regular zipper

Example of a regular zipper. Note the nice, big, obvious hole in the zipper pull.

Invisible zipper Example of invisible zipper. Unlike the regular zipper, the pull on this one doesn’t have a hole; the new zipper pull will have to attach to the horseshoe-shaped piece above the pull shown here. Continue reading